How to eliminate the smell from the sink in the kitchen

Receiving guests, everyone seeks to put their home in a positive light. The unpleasant smell in the kitchen puts the owners of the apartment in an awkward position. As a rule, the problem arises due to the clogging in the sewer pipes. As a result of this outcome, water stagnates, food waste gets stuck, which is not so easy to remove. There are several universal ways to help solve the difficulty without calling a specialist. We will analyze the actions step by step and highlight the important aspects.

How to eliminate the smell from the sink in the kitchen

Pipe and siphon cleaning

The siphon is a pipe of curved shape, which is located under the sink. It serves as a kind of barrier that prevents odors from entering the room from the sewer. 2 types of siphons are distinguished: barrel-shaped and self-washed. The first option consists of a removable part, which is easily unscrewed and cleaned, without having to remove it. The siphon of the second type is a curved pipe.

  1. First you need to check the pipes for integrity. There are frequent cases when the hose is disconnected, a joint or crack is formed, as a result of which the stench penetrates from the riser. To carry out the test correctly, inspect the connections below the siphon. If you do not notice spoilage, but the liquid in the sink still drains slowly, the problem is a clogged pipe. For the most part, the problem is fixed without the help of a plumber, even a single woman can solve the problem.
  2. The easiest way to clean pipes is to use a plunger. Pour water into the sink so that the niche of the instrument is covered with liquid. Create a vacuum, then slowly raise and lower the handle. In this case, you can not tear the thicket from the bottom, otherwise all efforts will be in vain. Increase the speed of the handle gradually. Periodically, you need to let the liquid into the drain to assess the rate of water leaving.
  3. If you notice that the use of a plunger has proved to be ineffective, use purchased products to clean the sewer and pipes. Such compounds dissolve food debris, oily impregnations, solid tumors, hair and hair. As a rule, the technology of use is quite transparent, it all depends on the degree of clogging and the interval during which processing was not carried out.
  4. Read the manufacturer's instructions on the back of the bottle. Typically, pipes are cleaned as follows: the composition is poured into the drain hole, a certain interval is expected, after which the pipes are washed with water. As practice shows, thick gels are considered the most effective, but not liquid serums or powders. In this case, clean only with protective gloves, since most of the products are extremely toxic.
  5. In cases where a pipe clog is formed deep from the drain hole, use a plumbing string (cable). The tool looks like a long wire twisted into a spiral (spring), to which a handle is attached for ease of use. To carry out the cleaning correctly, put the cable into the drain hole, start driving it back and forth to probe the neoplasms.
  6. To determine if there is a blockage or not, you can gently push it all the way into something soft. Try to push the pollution deeper into it by pressing it vigorously. In cases where it is impossible to carry out such manipulation, you need to pull the lump outward with reverse-translational movements. The cable will repeat the bend of the pipe, so feel free to stick it deeper. To increase efficiency, water is allowed to open.
  7. Evaluate the design of the pipes. If possible, try removing the siphon and rinsing it thoroughly.There are frequent cases when hair, a toothpick, food and other wastes get stuck in the curved part, which “grow” onto each other, thereby forming a blockage. Modern siphons are equipped with a stopper, you can unscrew it and clean the cavity without disassembling the structure.
  8. Another option for pipe cleaning is the use of a cone-shaped hose in combination with strong water pressure. This technology is designed for cleaning pipes of small diameter, just such is installed in the kitchen. To carry out the procedure, let the appliance drain, pour water into a niche, and then cover the area around the hose with rags and plastic bags (you can use cling film). Such a move will not allow water to flow back. You can not use the technique after treatment of sewage with chemicals. If the blockage is strong, under pressure, the water will spill out, taking the cleaning compound with it.
  9. If all of the above methods for eliminating an unpleasant odor are ineffective, use the following recommendation. Open the water under a small pressure, listen to the sound of runoff. If you find an incomprehensible gurgle, it means that a water lock has been disrupted, preventing the penetration of stench from the sewer. The reason for this is the vacuum at the base of the riser or the sharp slopes of the pipes and the length of the connections.
  10. In cases where a corrugated pipe is installed in the kitchen, a blockage may occur because it is bent. Get a new device, install it so that the water drains freely and does not stagnate. In addition, such a move will not allow food debris to accumulate on the walls, forming a lump. Twist the corrugation as necessary, fix it with electrical tape or tape.

Folk ways of washing pipes

  1. Baking soda. The product is able to eliminate blockage and prevent its further formation, if you use the composition 1 time in 7-10 days. Mix in a homogeneous solution of 100 g. baking soda and 300 ml. warm water, wait until the granules dissolve. Pour the resulting composition into the sink drain, wait about 40-60 minutes. While waiting for the action of the mixture, pour water in a basin or bucket at a temperature of 40-45 degrees, add 0.5 kg. soda. At the end of the period, pour the liquid into the drain. The method is designed more for preventive purposes, but it is also able to cope with small impurities in pipes or a siphon.
  2. Table vinegar. Another effective method that eliminates the cause of stench coming from the sink. Pour 700-800 ml into the drain. vinegar solution (concentration of 6-9%), cover the hole with a rag, bag or cork, so that the composition does not evaporate. Wait about 30-45 minutes, during this period vinegar will corrode all deposits. At the end of time, rinse the pipes with two buckets of warm water, if necessary, use a plunger as an addition.

Bad odor occurs due to siphon blockage or shutter shift. Identify the problem, then try to eliminate it yourself. Use purchased or folk remedies, a plumbing cable, a plunger, a cone-shaped hose. If after all the tried methods you did not manage to get rid of the stench, call a specialist.

Video: remove the smell from the sink in the kitchen

We recommend reading


leave a comment

Submit

wpDiscuz

No comments yet! We are working to fix it!

No comments yet! We are working to fix it!

Pests

the beauty

Repairs